Ergo Tab EBMT5 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ergo Tab EBMT5. Ergo Tab EBMT5 12 pagina's.

Step 2B Solid Concrete or Concrete Block Option

WARNING:

Avoid potential personal injury or property damage! DO NOT over-tighten the

lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are

pulled ﬁrmly against the wall plate [01].

Ensure the wall plate is securely fastened to the wall before

continuing to the next step.

● Mount the wall plate [01] directly onto the concrete surface

● Anything covering the wall must not exceed 5/8 in. (16 mm)

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Never drill into the mortar between blocks

2B-1

2B-2

Position the wall plate at your

desired height, level the wall plate

and mark the pilot hole locations.

Drill 4 pilot holes using a 3/8 in.

(10mm) diameter drill bit. Make

sure the depth is not less than

9/16 in.(65mm)

mortar between blocks.

Anchor

. Never drill into the

2 9/16 in. (65mm)

ø3/8 in. (10mm)

Wall