Clarion ARX4570 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Clarion ARX4570. Clarion ARX4570 15 pagina's. Am/fm cassette with cd/md changer control
Ook voor Clarion ARX4570: Handleiding voor installatie/draadverbinding (4 pagina's)

Pagina afdrukken

Area Change Function

Use this to listen to the radio outside of the

United States.

Switchable frequency spacing

This car stereo is initially set to tune in frequen-

cy intervals of 10 kHz for AM and 200 kHz for

FM, the standard calibrations in the U.S. When

using the unit outside the U.S., use the following

procedure to switch the frequency steps and fre-

quency range:

1) Turn the power on and set the tuner mode.

2) Keep the BND button

pressing the button, press the RPT button

3) Release the buttons.

This procedure changes the factory setting to

9 kHz steps for AM and 50 kHz steps for FM,

the standard calibrations for countries other

than the U.S.

To change the AM/FM setting back to the U.S.

standard frequencies:

1) Set the tuner mode.

2) While pressing the BND button

RDM button

3) Release the buttons.

Your car stereo will once again be calibrated

to receive standard U.S. transmissions.

The chart below lists the frequency specifica-

tions for the U.S. and other countries.

Inital Setting

(U.S. standard)

Frequency

10 kHz

spacing

530 to

Frequency

range

1710 kHz

Frequency

200 kHz

spacing

87.9 to

Frequency

range

107.9 MHz

Mute

Use this function to turn off the sound immedi-

ately.

Press the MUTE button

and "MUTE" appears on the display. Press the

MUTE button again to cancel the mute mode.

pressed and while

, press the

New Setting

(outside U.S.)

9 kHz

531 to

1629 kHz

50 kHz

87.5 to

108 MHz

. The sound turns off

CD Changer Operation

When a separately sold CD changer (CDC635/

CDC1235) is connected, it can be controlled

from the ARX4570.

CD-ROMs cannot be played.

Listening to the Disc

Press the FNC button

changer mode, then the CD starts playing.

Stopping (pausing) Playback

Press the Play/Pause button

playback.

Selection of CDs

Press the DISC Up button

button

, then select the CD you wish to play.

UP: Every time you press the button, the

CDs will be selected as:

DN: Every time you press the button, the

CDs will be selected as:

Selecting Tracks (songs)

Press the Left and Right buttons

: Playback will start from the next track.

: Playback will start from the beginning of

the track currently playing. When this

button is pressed again, the CD will play

from the previous track.

Fast-Forward and Fast-Backward

Press and hold the Left and Right buttons

: To fast-forward

: To fast-backward

Pressing the Left / Right button for 1 second or longer

will move forward or backward 5 times faster than nor-

mal play, and pressing it for 3 seconds or longer will

do the operation 30 times faster.

and select the CD

again to resume

or the DISC Down

1....

1.....