Clarion APA2I50G Bedienings- en installatiehandleiding - Pagina 2
Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Clarion APA2I50G. Clarion APA2I50G 5 pagina's. 75wx2 channel power amplifier
Pagina afdrukken
Channel mode selector switch_
Switches between STEREO and MONO.
HIGH CURRENT Indicator_
Lights when the power guard circuit is turned off.
Power guard selector switch_
Switches between HIGhTdEFINITION (Power guard ON)
and HIGH CURRENT (Power guard OFF).
HIGH DEFINITION Indicator_
Lights when the power guard circuit is turned on.
(The power guard function is activated.)
Filter selector switch_
Switch between HP<3=>LP<=0 OFF.
HP : Outputs only sound from which low frequecies are cut.
(Adjust with the filter frequency adjustment volume ranging from
50Hz to 200 Hz.
LP : Outputs only sound from which high frequecies are cut.
(Adjust with the filter frequency adjustment volume ranging from
50Hz to 200 Hz.
OFF: Outputs sound of all bands.
Power indicator
This indicator lights when the
power is turned on to the main
unit.
Filter frequency control volume
Adjust the filter frequency ranging
from 50 Hz to 200 Hz.
Gain control volume_
• These selector switches can adjust amp output level. Use them to adjust
the balance of the front and rear speakers or to emphasize the low
frequencies.
• To protect the speaker, the gain controls CH 1/2 was set to the
MIN position when shipped from factory. On completion of the audio system
installation and wire connections, rotate them clockwise to increase output
level.
• When making a connection with a speaker of low input, be careful not to set
the gain control CH 1/2 to an excessive level position.
Figure 4
Upper Panel Layout
4
.
CONNECTIONS
1. The RCA input jacks are on the front panel, and on the rear panel are the power
3. The speaker terminals are also gold-plated,
terminals, auto motive type fuses and speaker output terminals.
4. The INPUT and OUTPUT connectors on the APA2150G are gold-plated RCA
2. On the APA2150G, the gold-plated power terminals are labeled (left to right) as
jacks, marked [L] for the Left channel and [R] for the Right channel.
REMOTE (remote turn-on), GROUND and BATTERY.
"
5
.
APPLICATIONS
APA2150G
Figure 5
Overall Connections