Clarion XR2220 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Clarion XR2220. Clarion XR2220 18 pagina's. Xr series amplifiers
Ook voor Clarion XR2220: Gebruikershandleiding & Installatiehandleiding (10 pagina's)

Pagina afdrukken

1. Power and Speaker Connections

Two-channel high power system

In this application, the XR2220 is used to drive a pair of subwoofers.

Subwoofer

Setting the gain

After completing the installation, follow these steps to set the gain control and perform the

final system checks.

1. Turn the gain control all the way counterclockwise.

2. Turn the vehicle's ignition switch on.

3. Turn the source unit on.

4. Set all tone or equalization controls to flat positions and turn loudness off.

5. Play music content and set the volume control to 75% of full level.

Note:

If the system uses an equalizer, set all frequency controls to the flat position.

6. Slowly increase the gain control. Stop when you hear a slight audio distortion.

XR2220/XR2420/XR2120