ERGO-INNOVATE EI6151 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ERGO-INNOVATE EI6151. ERGO-INNOVATE EI6151 12 pagina's. Full-motion tv wall mount

Pagina afdrukken
3A-1
3A-2
01B
3A-3
3A-4
A1
01B
Use a stud finder (not included)
to locate wood studs or use an
awl (not included) to verify the
edges. Mark the edge and
center locations.
1
Position the arm assembly/
wall plate [01B] at your
desired height and line up
2
the holes with your stud
center line. Level the arm
assembly/wall plate [01B]
UP
and mark the holes.
3
Drill 3 pilot holes using a 5/32 in.
(4mm) diameter drill bit. Make sure
the depth is not less than 2 23/64 in.
(60mm).
You may need assistance
with this step.
Install the arm assembly/wall plate
[01B] using lag screws [A1].
Tighten the lag screws [A1] only
until they are pulled firmly against
the arm assembly/wall plate [01B].
UP
08
Awl
(not included)
2 23/64 in.(60mm)
ø5/32 in.(4 mm)
3/8in. (10mm)
Socket Wrench
(Not lncluded)