AerAtron AE+2 60 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AerAtron AE+2 60. AerAtron AE+2 60 18 pagina's.

General Information

1. All electrical motors, including fan motors generate some noise, and may feel hot to the touch. This is

NOT a fault.

2. Ceiling fans tend to move during operation due to the fact that they are not rigidly mounted. (Rigid

mountings can generate excessive vibration and stress on the mountings).

Movement of a couple of centimetres is quite OK and does not suggest that the fan will fall down. The

Aeratron fan is mounted securely on a metal Hanger Bracket with rubber cushioning and a ball joint to

allow free movement. Please note that due to manufacturing variations not all Aeratron ceiling fans

are exactly the same - some may move more than others. Note: Excessive wobble can be caused by the

Drive Shaft not being positioned vertically. This can be easily rectiﬁed by adjusting the position of the

Fan Motor Assembly in the Hanger Bracket (see step 9 (D) page 9).

3. Ceiling fans are an environmentally smart choice to help cool you in your home. They work by creating

air ﬂow which causes a cooling sensation on the skin. Ceiling fans do not cool down air, so for energy

wise use, they should be switched oﬀ when leaving a room. The eﬀectiveness of ceiling fans is also

dependent on the humidity in the air - they are more eﬀective in humid environments, and less so in

dry ones.

4. During winter, a reverse (counter clockwise) turning fan helps to reduce heating costs. Warm air rises

to the ceiling, where it cannot be felt by the occupants of a room, especially in areas with high ceilings.

The fan assists to distribute warm air more evenly in the room allowing to set the thermostat several

degrees lower.

Threaded components working slightly loose or parts even slightly damaged or bent during vigorous cleaning

or bumping can cause wobble and noise. This is not covered under warranty, but care during maintenance and

cleaning should prevent this from occurring.