Direct Healthcare Group 56-270-CS-UK Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Direct Healthcare Group 56-270-CS-UK. Direct Healthcare Group 56-270-CS-UK 20 pagina's.
Pagina afdrukken
21. Maintenance
The chair is made from stainless steel/powder coated tubing and aluminium.
Exposed, unpainted parts are made of aluminium or stainless steel. Make sure the
product feels firm and stable – no fasteners may be loose. Damaged or defective
parts should be replaced as soon as possible.
Cleaning, general
•
Clean the chair by wiping with regular cleaning agent (NOT Pentanol based) or
use a washer/autoclave (max 85 C).
•
Remove the seat and clean it separately or use a washer/autoclave (max 85 C).
NOTE: The remote control/control box (or the connector/
female connector if the remote control is removed before
washing) must be protected from high pressure water.
Use a plastic bag or similar that can withstand washer water pressure.
Place the remote control/control box or the connector/female
connector so that running watercannot force its way in.
•
Clean the pillars with detergent/disinfectants
commonly used in healthcare (alcohol-based).
•
Make sure the protective cover is installed at the bottom of
each pillar.
Special checks (at least once per year)
1. Armrest – check that slip protection/wrist protection
are intact and secured.
2. Pillars (electric actuator/raise-lower) + electric actuator/
tilt: check the function of the remote control and that
the electric actuator attachment devices are not loose.
3. Seat/stopped seat – whole and without cracks. No sharp edges may be
present.
4. Footrest platforms – whole and adjustable in the intended manner. Check that
the clips are whole and properly fastened. Heel restraints must be in position at
the back of each footrest platform.
5. Wheels – may not be stiff or loose. Also check that the brakes work.
6. Back strap; the back strap must be intact and may not have any holes or other
damage to the belts and anchors.
22. Technical Specifications
Material
Aluminium
Plastic (PP, PP/GS, PA, PA/GS, TPE, Silicone)
Textile Dartex
Foam (PUR)
Steel (Stainless)
Frame / stand Powder coating (polyester)
Specification power system
EA SY SO FTBA CK
DIRECT H EA LT H CAR EGR OU P.COM
1
3
4
6
2
5
11