AerAtron FR3 Series Gebruikershandleiding & Installatiehandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding & Installatiehandleiding voor {categorie_naam} AerAtron FR3 Series. AerAtron FR3 Series 18 pagina's.
Ook voor AerAtron FR3 Series: Gebruikershandleiding & Installatiehandleiding (18 pagina's)
Pagina afdrukken
Pairing the Remote Control
STEP 6
Pairing a Single Fan per remote control: LEARN MODE
NOTE: Blades must be attached prior to testing the fan
1. On Receiver: Verify that the "Learn" switch is in the "O" position
2. Slide battery cover to unlock - Locate the LEARN BUTTON &
insert batteries.
3. Switch on the main power to activate the receiver, indicated
by one beep. (Energise one fan reciever at a atime).
4. Within 60 seconds after the power is turned on (one beep),
press and hold the LEARN button on the Remote Control
(min. 3 secs.) until Fan Receiver issues three 'beeps' which
indicates successful pairing.
5. On Receiver: switch the "Learn" switch to "X" (this will
lock the pairing code with the remote)
6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test
fan functions.
7. To re-pair, repeat steps 3 to 5
NOTE: Power must be off for 10 seconds min. before repairing.
The Remote Control and Fan Receiver will memorise the pairing
code for future use even if mains power is switched off.
LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.
(Light will maintain last setting if turned off)
Pairing multiple fans per remote control.
One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify
that the "Learn" switch is in the "O" position. Switch on the mains power to activate ALL
receivers at the same time, indicated by one 'beep'. Within 60 seconds, press and hold the
LEARN button on the remote control (min. 3 seconds) until fan receiver issues three 'beeps'.
2
5
4
4
The remote control is pre-programmed
!
No pairing with the receiver required
1
3
4
6
Controlling the Fan
1. Fan OFF
2. Fan ON & Speed 1-6
3. Forward / Reverse
Use Forward mode (counterclockwise) for cooling
Use Reverse mode (clockwise) to circulate warm air
4. Timer 2, 4 & 8hrs
5. Light ON/OFF
To DIM, press and HOLD light button
to cycle from bright to dark.
(LIGHT SWITCH at DIMMING position)
6. Breeze/Cycle through speeds randomly
LIGHT SWITCH
'LEARN' BUTTON
O LIGHT DIMMING
| LIGHT ON/OFF
7