Direct IP Idis DC-D Series Installatiehandleiding - Pagina 15

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Direct IP Idis DC-D Series. Direct IP Idis DC-D Series 18 pagina's.
Ook voor Direct IP Idis DC-D Series: Installatiehandleiding (18 pagina's)

Pagina afdrukken

Part 3- Appendix

Troubleshooting

Problem

The main unit won't turn

on.

PoE switch isn't being

recognized.

I can't see Live videos.

Images are blurry.

Video color appears

incorrect.

Images are blinking.

Lost the admin ID and

password and unable

to connect to a network

camera.

Unable to launch IDIS Web.

Check

• Check the power cable connection.

• Check the power outlet.

Check the grounding status of the I/O device connected to the camera and the PoE

switch. If they are not grounded, ground them and try again.

• Check the camera's power status.

• Check the network connection status of the computer and the network camera.

• Make sure the lens is clean. If not, clean it using a soft piece of cloth or a brush.

• Make sure the lens is in focus.

• If there is too much light coming into the camera or the camera is picking up an

overly bright light source, adjust the camera's position/angle accordingly.

Check the white balance settings. If using the Auto option, it may take some time

for the white balance to be adjusted.

If the camera is pointed at the sun or a fluorescent lamp, adjust the camera's angle

away.

You must perform a factory reset. A factory reset will revert all settings, including

network settings, to their factory defaults. After performing a factory reset, make a

memo of the admin ID and password as a safety precaution.

If the IDIS Web login screen is not loading, check which version of Microsoft Internet

Explorer you are using. IDIS Web may not launch properly on versions 8.0 or below.