Claris Healthcare Reflex Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Claris Healthcare Reflex. Claris Healthcare Reflex 6 pagina's. Knee rehabilitation system
Pagina afdrukkenWhat does it mean if my sensor is disconnected?
On the home screen of your tablet:
1. If the dot on the top left of your home screen (to the left of Day X)
is Green your Claris Reflex sensor is connected to the tablet.
2. If the dot is Orange, the sensor is connected to the tablet, but is
not properly attached to the adhesive pads so it isn't sending any
data. Disconnect the sensor from the adhesive pads on your leg,
then reconnect the sensor by firmly pressing the sensor onto the
adhesive pads.
3. If the dot is still Orange, disconnect the sensor from the
adhesive pads on your leg and use a new set of adhesive pads
from your Claris Reflex box.
4. Without applying the new adhesive pads to your leg, snap the
sensor onto the new adhesive pads and check the colored dot on
the home screen again.
5. If the dot turns Green, you will need to replace the adhesive
pads on your leg with the new ones from your Claris Reflex box.
6. If the dot is still not Green, please contact your case manager.
7. If the dot is Red and you are currently wearing your Claris
Reflex sensor, please contact your case manager.
800-004-01-90 | Claris Healthcare | 1-844-369-9977 ext2 | [email protected] | Page 5
I am on the Icing page, but the timer won't start.
The Icing timer starts once the sensor detects that the temperature of
your knee is below a temperature set by your care team. The timer will
start counting once the temperature reading is between the two
triangles below the thermometer.
How do I keep track of my pain medications?
To record a medication and view your medications log:
1. On the tablet home screen, press on Activities and then
Medication.
2. If you have not already setup a medication, then you will need to
press Setup Medication and then Add Medication.
3. On the Add Medication screen, type the name of the medication
you wish to add and click Done.
4. Repeat this process until you have added all your medications.
5. To record your medications, press Take Medication and select
the medication from your list of medications.
6. A log of your medications will be displayed to the right of the
Take Medications button. If you'd like to review the previous
day's medications, press the Previous button.
800-004-01-90 | Claris Healthcare | 1-844-369-9977 ext2 | [email protected] | Page 6