3Com OfficeConnect WXR100 Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 3Com OfficeConnect WXR100. 3Com OfficeConnect WXR100 10 pagina's. Secure converged networks enterprise edition
Ook voor 3Com OfficeConnect WXR100: Snelstarthandleiding (2 pagina's), Producthandleiding (15 pagina's)
Pagina afdrukken
2
M
S
S
OBILITY
YSTEM
OFTWARE
Click Start to begin. The wizard screens guide you
6
through the configuration steps. Each screen has
online help to guide you through the configuration.
After guiding you through the configuration, the
7
wizard displays a summary of the configuration values
you selected. Here is an example:
Q
S
G
UICK
TART
UIDE
Review the configuration settings, then click Finish to
8
save the changes, or click Back to change settings. If
you want to quit for now and start over later, click
Cancel.
If you click Finish, the wizard saves the configuration
settings into the switch's configuration file. If the
switch is rebooted, the configuration settings are
restored when the reboot is finished.
The switch is ready for operation. You do not need to
restart the switch.
CAUTION: On a WXR100, do not press the Fn switch
for more than four seconds! On a WXR100 that is
fully booted, the Fn switch erases the configuration if
held for five seconds or more. If you do accidentally
erase the configuration, you can use the Web Quick
Start to reconfigure the switch.
Remotely Configuring a Switch Using 3WXM
(any model)
This installation option requires someone to
preconfigure the switch in a 3WXM network plan and
someone to physically install and power on the switch.
Preconfigure the Switch in 3WXM
If you know the switch's serial number, use the
following procedure to set up the switch's
configuration in 3WXM.
Start 3WXM Services.
1
Start a 3WXM client and connect to 3WXM Services.
2