Xerox 850DP - Phaser Color Solid Ink Printer Handleiding reinigingsinstructies - Pagina 9

Blader online of download pdf Handleiding reinigingsinstructies voor {categorie_naam} Xerox 850DP - Phaser Color Solid Ink Printer. Xerox 850DP - Phaser Color Solid Ink Printer 9 pagina's. Installation guide for accxes 10.2
Ook voor Xerox 850DP - Phaser Color Solid Ink Printer: Specificaties (2 pagina's), Gebruikershandleiding (16 pagina's), Aanvullende handleiding (1 pagina's), Aanvullende handleiding (11 pagina's), Installatiehandleiding (1 pagina's), Upgrade handleiding (8 pagina's), Aanvullende handleiding (26 pagina's), Release Release (33 pagina's), Release Release (11 pagina's), Release Release (11 pagina's), Installatie-instructies (2 pagina's)

Cleaning Phaser® 850 Printers

Cleaning for multipicks: separator pad

If the printer picks multiple sheets of paper from the upper tray, clean the separator pad.

Remove the upper media tray from the printer.

Using an alcohol-soaked cloth, gently wipe the separator pad.

Inspect the separator pad for damage to the metal edge; it should be free of dents and lie flat

against the rubber surface. If any damage is seen, the separator pad should be replaced.

Replace the upper media tray in the printer.

Cleaning for lower tray jams: paper-feed rollers

If the printer feeds paper incorrectly or feeds more than one sheet at a time from the High-Capacity

Paper Tray Assembly, and the rollers are visibly dirty, perform the following cleaning procedures.

Remove the paper tray from the High-Capacity Paper Tray Assembly. If your printer has two

assemblies, remove the tray from each one. The two paper-feed rollers for each assembly are

visible when each tray is removed.

Using an alcohol-soaked cloth, scrub the rollers thoroughly. Rotate the roller several times to

ensure proper cleaning.

Replace the paper tray in the High-Capacity Paper Tray Assembly.

9103-63

9103-22

Phaser 850 Color Printer