Xerox 850N - Phaser Color Solid Ink Printer Release Release - Pagina 22

Blader online of download pdf Release Release voor {categorie_naam} Xerox 850N - Phaser Color Solid Ink Printer. Xerox 850N - Phaser Color Solid Ink Printer 33 pagina's. Installation guide for accxes 10.2
Ook voor Xerox 850N - Phaser Color Solid Ink Printer: Specificaties (2 pagina's), Gebruikershandleiding (16 pagina's), Aanvullende handleiding (1 pagina's), Aanvullende handleiding (11 pagina's), Installatiehandleiding (1 pagina's), Handleiding reinigingsinstructies (9 pagina's), Upgrade handleiding (8 pagina's), Aanvullende handleiding (26 pagina's), Release Release (11 pagina's), Release Release (11 pagina's), Installatie-instructies (2 pagina's)

8.4 AccXES Client Tools

Manual feed media source will be ignored when used with the AccXES Client Tools' page

composition feature.

Go to AccXES Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media

Source drop down menu. Although "Manual Feed" is listed as a choice of media source for page

composition jobs, the print job will be treated as if AUTO media source was selected. If an

appropriate roll of media is available, it will be printed on that media; otherwise, the job will query

until the correct roll media is installed. In addition, other Media Source selections will be treated

as AUTO if an appropriate roll of media is available in a different roll.

8.5.1 Printer Queue – Main WebPMT Screen

The AccXES firmware supports a maximum of 120 active printer jobs in the queue and 8 active

copy jobs. If subsequent jobs are sent before the 120th prints, ports will refuse connections and

there can be scan errors; when there are fewer jobs in the queue, the jobs can then be

resubmitted or scanned. Additionally, completed jobs will be removed from the queue display

immediately to make room for the newly submitted print jobs. To avoid these issues, keep the

number of active print jobs to under the 120 limit.

NOTE: More than 120 files can be sent from the Document Submit Tool as one print job, but all of

the files in the print job must have printed before sending subsequent jobs, or the jobs will be

refused.

It is recommended to use Netscape 7.0 or newer.

•

When Netscape 6.1 is used, the pen patterns do not appear to load correctly, and the

browser exhibits erroneous behavior. However, if the Stop (browser) button is pressed and

the patterns page is viewed, the new pen pattern will appear as expected.

•

HTML code may appear on the Media page after pressing the Update Printer button, when

Netscape 6.1 is used. The changes will, however, be kept.

A "Document contains no data" message may appear on the Main WebPMT page after rebooting

the printer and pressing the Get Status button. If so, click the OK button on the message box and

again select the Get Status button.

Zum Drucken von Etiketten mit Umlauten DRUCKERVORGABEN > DRUCKER-EINSTELLUNG

> Plot-Etiketten wählen.

Anschließend im Dropdown-Menü für Fonts einen der folgenden Fonts wählen: HP2 Stick Font

Latin - 1 oder HP2 Stick font Latin - 1 – Proportional.

Page 22