Xerox DOCUCOLOR 12 Supplement handleiding - Pagina 13

Blader online of download pdf Supplement handleiding voor {categorie_naam} Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 18 pagina's. Carrier
Ook voor Xerox DOCUCOLOR 12: Specificaties (2 pagina's), Referentiehandleiding (10 pagina's), Snelstarthandleiding (5 pagina's), Snelstarthandleiding (8 pagina's), Handmatig gebruiken (12 pagina's), Aanvullende handleiding (4 pagina's), Handleiding Kennismaken (24 pagina's)

Perform one of the following:

•

Place the first original on the Document

Glass.

•

Load the first batch of originals into the DADF.

Select any additional features desired for the copy

job.

NOTE: All feature settings are maintained for the

entire copy job. You can not change any feature

settings once the Start button is selected.

Press the Start button.

When the original(s) have been scanned, a screen

displays the current copy settings and the End

Job button.

Remove the original(s) from the Document Glass

of the DADF output tray.

Perform one of the following:

•

If you scanned your first original from the

Document Glass, place the next original on

the Document Glass.

•

If you used the DADF to scan your first set of

originals, place your next set of originals in the

DADF.

Press the Start button to continue the copy job.

For all additional originals, repeat steps 9 and 10.

When all pages or all sets have been scanned,

touch End Job on the Job in Progress screen.

Copies will be delivered to the appropriate output

tray.

DOCUCOLOR 12/DCCS 50

Figure 7: Job in Progress screen

CUSTOMER EPC SUPPLEMENT