Xerox DOCUCOLOR 12 Handleiding Kennismaken - Pagina 9

Blader online of download pdf Handleiding Kennismaken voor {categorie_naam} Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 24 pagina's. Carrier
Ook voor Xerox DOCUCOLOR 12: Specificaties (2 pagina's), Referentiehandleiding (10 pagina's), Snelstarthandleiding (5 pagina's), Snelstarthandleiding (8 pagina's), Handmatig gebruiken (12 pagina's), Aanvullende handleiding (4 pagina's), Supplement handleiding (18 pagina's)

Xerox DOCUCOLOR 12 Handleiding Kennismaken
Performing routine tasks

Loading paper in tray 1

Demonstrate the steps as you describe them. See
Figure 6.
You have four paper trays. To load paper in tray 1:
Note: Tray 1 is preset to hold up to 500 sheets of 8.5
x 11 in. paper. The tray can be set to hold A4 paper
by your service representative.
1. Face the DocuColor 12 Printer so that you are
directly in front of the paper trays.
2. Open the tray by pulling it straight out.
3. Take the paper out of the wrapper.
4. Place the stack of paper in the drawer as shown.
Add paper up to the Max line. Straighten the
paper stack so the edges are even.
5. Close the tray by pushing it in toward the
printer.

Loading paper in trays 2, 3, and 4

Note: Paper trays 2, 3, and 4 can hold up to 550
sheets of paper. Sizes can be adjusted from 8 x 10 to
11 x 17 in..
To load paper in trays 2, 3, or 4: (See Figure 7)
1. Open the tray by pulling it straight out.
2. Place paper in the tray, pushing the paper all the
way to the left. Straighten the stack so the edges
are even.
3. Adjust the rear paper guide by squeezing the
release and sliding the paper guide toward the
front of the printer until it just touches the stack
of paper.
4. Adjust the right paper guide by squeezing the
release and sliding the paper guide to the left
until it just touches the stack of paper.
5. Close the tray by pushing it in toward the
printer.
Getting to Know Your Product
Product Orientation Guide
4
Figure 6
3
2
Figure 7
5
2
4
5
1
5