Getting Started Guide
The Splash CD-ROM that shipped with the color server contains a folder named Winviewer.
This folder has all the utilities and files you need to install and setup the Viewer and printer
description files on the workstation.
The Microsoft Client for Microsoft networks and TCP/IP protocols must be installed on the
workstation in order to run the Viewer. These protocols also support printing to the Splash M
Series.
If you are installing the Viewer and printer files on a non-U.S. English Windows 95/98
workstation, you may optionally use the installation procedure in Section 5.5.2. This
procedure contains extra steps, but it will minimize the amount of US English that appears
in the Printer Properties dialog box on the workstation.
1. Insert the Splash CD-ROM that shipped with the color server into your client
workstation's CD-ROM drive.
2. Open the WINVIEWER folder on the CD-ROM.
3. Double-click on Setup. When Setup starts, a dialog box appears that prompts you to
select a language.
4. Select the English language from the pull-down list and click OK. The Install Shield
Wizard starts.
5. Install the Viewer by following the Install Shield prompts.
6. When the Viewer installation is complete, remove the CD-ROM from the workstation's
CD-ROM drive.
7. Start the Add Printer Wizard by clicking on Start, Settings, Printers and Add
Printers.
8. When the Add Printer Wizard prompts for a Local Printer or Network Printer, specify
Network Printer and click Next.
9. When the Add Printer Wizard prompts for a network path or queue name, enter the
Windows network name of the Splash M Series Color Server's configured print queue. If
the hostname is splashm and the print queue name is splash_print, the Windows
network name is \\splashm\splash_print.
10. When the Add Printer Wizard prompts for the manufacturer and model,
a.
Click on Have Disk, then Browse.
b. Go to Program Files\Splash\M Series Viewer v1.0 folder and select either
the win95 or win98 folder.
c.
Choose the OEMSETUP.INF file and click OK.
11. When the Add Printer Wizard displays the printer model, Splash M v1.0, click Next.
12. When the Add Printer Wizard prompts for a printer name, type the desired local
logical printer name and append "_hold" if you are adding a hold queue or "_print" if you
are adding a print queue. The reason for adding "_hold" or " _print" is because both
queues are represented on the network as identical printer icons (Figure 20).
page-30
0015647-0001 February 18, 1999
Pagina afdrukken