Xerox Phaser 3600 Instructie - Pagina 23

Blader online of download pdf Instructie voor {categorie_naam} Xerox Phaser 3600. Xerox Phaser 3600 23 pagina's. Toner cartridge remanufacturing
Ook voor Xerox Phaser 3600: Kenmerken (1 pagina's), Opties Handleiding (1 pagina's), Installatiehandleiding (2 pagina's), Brief volatiliteit (1 pagina's), Gebruiksaanwijzing (2 pagina's), Handleiding voor beoordelaars (17 pagina's), Installatie-instructies (2 pagina's), Installatie-instructies (1 pagina's), Handleiding voor firmware-upgrade (1 pagina's), Vrijwillig sjabloon voor producttoegankelijkheid (11 pagina's), Beknopte handleiding (4 pagina's)

Pagina afdrukken

REPETITIVE DEFECT CHART

PCR:

38 mm

Developer roller:

50 mm

Supply roller:

42 mm

Transfer roller

56 mm

OPC drum:

94 mm

Upper fuser roller:

126 mm (mark on the front of the page)

Lower fuser roller:

126 mm (mark on the back of the page)

PRINTING TEST PAGES

1. Press the MENU button until INFORMATION appears on the display.

2. Press OK.

3. Press the UP or DOWN arrow until the desired test page appears on the display.

Some options are the INFORMATION page and DEMO page appear.

RUNNING THE CARTRIDGE CLEANING PAGE

1. With the printer at READY, press the MENU button and select SYSTEM SETUP>MAINTENANCE>CLEAN DRUM.

2. Select PRINT>YES.

3. The cleaning page will run.

RUNNING THE FUSER CLEANING PAGE

1. With the printer at READY, Press the MENU button and select SYSTEM SETUP>MAINTENANCE>CLEAN FUSER

2. Select PRINT>YES.

3. The fuser page will run.

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS