Xerox Phaser 4 400 Installatie-instructie stuurprogramma

Blader online of download pdf Installatie-instructie stuurprogramma voor {categorie_naam} Xerox Phaser 4 400. Xerox Phaser 4 400 6 pagina's. Laser printer
Ook voor Xerox Phaser 4 400: Specificatieblad (2 pagina's), Papieren handleiding (42 pagina's), Specificaties (3 pagina's), Ondersteuningshandleiding (27 pagina's), Installatiehandleiding (24 pagina's), Servicehandleiding (20 pagina's), Handleiding voor probleemoplossing (48 pagina's), Handleiding voor beoordelaars (16 pagina's), Servicehandleiding (13 pagina's), Handleiding voor installatie en snelle referentie (41 pagina's), Servicehandleiding (15 pagina's), Servicehandleiding (9 pagina's), Onderhoudshandleiding (9 pagina's), Handmatig (22 pagina's)

Windows NT 4.x Network

This section provides installation and troubleshooting steps for Windows NT 4.x:

Preliminary steps — see page 17.

Quick CD-ROM install steps — see page 17.

Other methods of installation — see page 18.

Windows NT 4.x troubleshooting (TCP/IP) — see page 21.

Windows NT 4.x troubleshooting (AppleTalk) — see page 22.

Preliminary steps

The preliminary steps given below must be accomplished for all printers regardless of the method that is

being used.

Verify that the printer is plugged in, turned on, and connected to an active network.

Verify that the printer is receiving network traffic by monitoring the LED's on the back of the

printer or on the CentreDirect External Print Server. When the printer is connected to a

functioning network receiving traffic, its link LED is green, and its traffic LED (amber) is flashing

rapidly.

Print the Configuration Pages and retain them for reference. For information on using the front

panel or printing Configuration Pages, refer to the Front Panel section of the Features Guide of

the Interactive Documentation CD-ROM.

Check the Configuration Pages and verify that the desired protocol is enabled.

Proceed to the Quick CD-ROM install steps or Other methods of installation section for the

installation method desired.

Quick CD-ROM install steps

Insert your printer's Printer Installer and Utilities CD-ROM into your computer's CD-ROM

drive. If your PC is set to autorun, a Xerox installer should automatically start. If it does not start,

do the following:

Click Start and Run.

In the Run window, type: <CD drive>:\INSTALL.EXE.

Select your desired language from the list.

Install the printer drivers for your printer. Within the Xerox installer, select Printer Drivers, and

then select Install Xerox Phaser 4400 Laser Printer Drivers.

Click Yes to accept the Xerox Software License Agreement.

The Xerox installer searches the network and displays the first printer found. Click Next to accept

this printer.

Phaser™ 4400 Laser Printer