Xerox Phaser 6200 Specificatie - Pagina 6

Blader online of download pdf Specificatie voor {categorie_naam} Xerox Phaser 6200. Xerox Phaser 6200 12 pagina's. Color laser printer
Ook voor Xerox Phaser 6200: Brochure & specificaties (4 pagina's), Installatiehandleiding (2 pagina's), Handleiding voor installatie en snelle referentie (49 pagina's), Papieren handleiding (27 pagina's), Handleiding voor installatie-instructies (12 pagina's), Ondersteuningshandleiding (26 pagina's), Handleiding voor probleemoplossing (42 pagina's), Handmatig (13 pagina's), Verbindingsinstelling (4 pagina's), Onderdelenlijst (48 pagina's), Installatiehandleiding (30 pagina's), Functies Handleiding (33 pagina's), Opties Handleiding (8 pagina's), Functiehandboek (4 pagina's), Onderhoudsinstructies (4 pagina's), Servicehandleiding (9 pagina's)

Transparencies

Transparencies can be printed from Tray 1 or the Multi-Purpose Tray. Handle transparencies by the

edges and with both hands to avoid fingerprints and creases, which can cause poor print quality.

Videos are available with instructions for loading transparencies. Videos are located on the

Interactive Documentation CD-ROM and on the Xerox web site at:

www.xerox.com/officeprinting/6200support/

Xerox Phaser® 6200 Transparencies

Xerox recommends that you use Phaser® 6200 Transparencies, which have been specifically developed

for use with this type of printer fuser.

Xerox Phaser® 6200 Premium Transparency Film

Size

A/Letter (U. S.)

8.5 x 11 in.

A4 (Metric Letter)

210 x 297 mm

To order supplies and accessories, contact your local reseller or visit the Xerox web site at:

www.xerox.com/officeprinting/6200supplies

Using non-Phaser 6200 transparency film

The printer features a unique oil-less fuser. Phaser 6200 Transparency film is designed specifically to

work with the printer's fuser. If you want to use non-Phaser 6200 transparency film, you must use a film

that meets the following specifications:

Compatible with oil-less fuser systems

Fusing temperature: 178 degrees C

Electrical surface resistivity: greater than 7 x 10exp11 ohm/square

Any overhead transparency materials used with this printer must be compatible with the heat and

pressure of the oil-less fusing process. The materials must not discolor, melt, offset, or release

hazardous emissions when heated to 178 degress C for 0.2 seconds.

Overhead transparency materials that do not meet these specifications can produce poor image quality,

produce a jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some

non-Phaser 6200 transparencies have paper tape on the edge that can separate in the heat of the fuser,

leading to damage. Using non-Phaser 6200 transparencies may damage the fuser. Damage caused by

using non-Phaser 6200 transparencies is not covered under the warranty, service agreement, or Total

Satisfaction Guarantee.

Phaser® 6200 Color Laser Printer

Description

Part Number

50 sheets

016-1948-00

50 sheets

016-1949-00

Specialty Printing