Xerox Phaser 8500 Vrijwillig sjabloon voor producttoegankelijkheid - Pagina 7

Blader online of download pdf Vrijwillig sjabloon voor producttoegankelijkheid voor {categorie_naam} Xerox Phaser 8500. Xerox Phaser 8500 9 pagina's. 8580 series; 8880 series
Ook voor Xerox Phaser 8500: Aanvullende handleiding (26 pagina's), Specificaties (6 pagina's), Snelle referentiehandleiding (9 pagina's), Gedetailleerde specificaties (4 pagina's), Beknopte handleiding (4 pagina's), Servicehandleiding (13 pagina's), Installatiehandleiding (9 pagina's), Servicehandleiding (30 pagina's)

Xerox Phaser 8500 Vrijwillig sjabloon voor producttoegankelijkheid
(g) Color coding shall not be used as
the only means of conveying
information, indicating an action,
prompting a response, or
distinguishing a visual element.
(h) When a product permits a user to
adjust color and contrast settings, a
range of color selections capable of
producing a variety of contrast levels
shall be provided.
(i) Products shall be designed to
avoid causing the screen to flicker
with a frequency greater than 2 Hz
and lower than 55 Hz.
(j) (1) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following: The
position of any operable control shall
be determined with respect to a
vertical plane, which is 48 inches in
length, centered on the operable
control, and at the maximum
protrusion of the product within the 48
inch length on products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls.
(j)(2) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is 10
inches or less behind the reference
plane, the height shall be 54 inches
maximum and 15 inches minimum
above the floor.
(j)(3) Products which are
freestanding, non-portable, and
intended to be used in one location
and which have operable controls
shall comply with the following:
Where any operable control is more
than 10 inches and not more than 24
inches behind the reference plane,
the height shall be 46 inches
maximum and 15 inches minimum
above the floor.
www.xerox.com/Section508
Supports
Color coding and additional means of unique identification
(e.g., text and symbols) are used.
Not applicable
There are no color contrast settings.
Supports
The flash rate of any flashing elements does not fall
between 2 Hz and 55 Hz.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
Not applicable
The Phaser™ 8500/8550 is a portable device and can be
placed on a table of any height.
Page 7 of 9
Last Revision 1/16/2006