Xerox Phaser 8550 Servicehandleiding - Pagina 5

Blader online of download pdf Servicehandleiding voor {categorie_naam} Xerox Phaser 8550. Xerox Phaser 8550 30 pagina's. 8580 series; 8880 series
Ook voor Xerox Phaser 8550: Brochure (8 pagina's), Aanvullende handleiding (26 pagina's), Specificaties (6 pagina's), Vrijwillig sjabloon voor producttoegankelijkheid (9 pagina's), Snelle referentiehandleiding (9 pagina's), Gedetailleerde specificaties (4 pagina's), Beknopte handleiding (4 pagina's), Servicehandleiding (13 pagina's), Installatiehandleiding (9 pagina's)

Service Terms

Manual Terms

Product Terms

Phaser 8400/8500/8550/8560 Color Printer Service Manual

Various terms are used throughout this manual to either provide additional

information on a specific topic or to warn of possible danger present during a

procedure or action. Be aware of all symbols and terms when they are used,

and always read Note, Caution, and Warning statements.

Common Acronyms:

The following list defines the acronyms that may be found in this manual.

ADC: Automatic Density Control

BTR: Bias Transfer Roller

CRUM: Customer Replaceable Unit

Monitor

CTD: Toner Density Control

ESD: Electrostatic Discharge

IDT: Intermediate Transfer Unit

Note

A note indicates an operating or maintenance procedure, practice or

condition that is necessary to efficiently accomplish a task.

A note can provide additional information related to a specific subject or

add a comment on the results achieved through a previous action.

Caution

A caution indicates an operating or maintenance procedure, practice or

condition that, if not strictly observed, results in damage to, or destruction

of, equipment.

Warning

A warning indicates an operating or maintenance procedure, practice or

condition that, if not strictly observed, results in injury or loss of life.

Caution:

A personal injury hazard exists that may not be apparent. For

example, a panel may cover the hazardous area.

Danger:

A personal injury hazard exists in the area where you see the sign.

MCU: Engine Control Board

NCS: Non-Contact Sensor

PHD: Imaging Unit

PL: Corresponds to the FRU Parts List.

ROS: Laser Scanning Unit

RTC: Charge Roller

iii