Xerox Wide Format 6030 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox Wide Format 6030. Xerox Wide Format 6030 22 pagina's. Wide format twain
Ook voor Xerox Wide Format 6030: Release-opmerkingen (7 pagina's), Installatiehandleiding (20 pagina's), Release Release (23 pagina's), Release Release (8 pagina's), Release Release (8 pagina's), Release Release (9 pagina's), Handleiding voor klantentraining (50 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (48 pagina's)

1.1

ADI Installation

The following example is based on the assumption that AutoCAD is install in drive C: and

the floppy drive is A:. AutoCAD is installed by the attached installer and has the standard

directory configuration.

This section describes the procedures to install the driver into AutoCAD and make it

available.

Chapter 1 Installing Plotter Driver

Using Windows Explorer, go to the floppy disk and select the driver

"plpxc_e.dll". Then select [Copy] from the [Edit] menu.

Go to the AutoCAD R14/DRV subdirectory, and select [Paste] from the [Edit]

menu.

If AutoCAD is installed in a drive and directory that are different from the

example, change the location accordingly.

Start up AutoCAD R14 and select [Tools] and then [Preferences] to open the

preferences dialog box.