Xerox WORKCENTRE 5740 Aan de slag handleiding - Pagina 17

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox WORKCENTRE 5740. Xerox WORKCENTRE 5740 32 pagina's. Smart card
Ook voor Xerox WORKCENTRE 5740: Informatie handleiding (50 pagina's), Gegevensblad (18 pagina's), Brochure & specificaties (8 pagina's), Veilige installatie en bediening (11 pagina's), Gebruikershandleiding (8 pagina's), Gebruiksaanwijzing (4 pagina's), Een kopie maken (10 pagina's), Installatiehandleiding (43 pagina's)

Xerox WORKCENTRE 5740 Aan de slag handleiding

Sending a Fax

1.
Load your documents face up in the document feeder input tray. Adjust the guide to touch the
documents.
Or...........
Lift up the document feeder. Place the document face down onto the document glass and register
it to the arrow at the top right rear corner. Close the document feeder.
2.
Press the Clear All (AC) button once to cancel any previous screen programing selections.
3.
Press the Services Home button and select the Fax
option. The Fax features are displayed.
4.
Enter the recipient's fax number by:
Keypad Dial - select the Enter Number area on
the touch screen and enter the number using the
numeric keypad.
Manual Dial - if a telephone handset is attached
to the device, select the Manual Dial key and dial
the number using the handset or the numeric keypad.
Speed Dial - select the Enter Number area and enter the 3 digit speed dial number, then
select the Speed Dial option.
Address Book - select the Address Book button to access the fax address book. Select an
entry from the Address Book to add to the Recipient list. Continue adding recipients as
required and select Close to return to the previous screen.
5.
If required, select Add to add the number entered to the Recipient list. Enter additional numbers
as required. The fax will be sent to all the numbers in the Recipient list.
6.
Select the required features for your fax job using the touch screen:
Dialing Characters are alphanumeric characters which have a specific fax function and can be
entered as part of the fax number.
Cover Letter allows you to send a fax with a covering letter.
2-Sided Scanning is used to select whether your originals are 1-sided or 2-sided.
Original Type is used to define the original document as text, text and photo, photo or halftone
photo.
Resolution can be used to optimize the resolution settings.
7.
Press Start to scan the originals and process the fax job. Remove the originals from the document
feeder or document glass when scanning has completed.
Note:
The Fax job enters the job list ready for sending.
8.
Select Job Status to view the job list and check the status of your job.
For information about additional Fax features, refer to
Sending a Fax
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Sending a Fax
on page 72 of Fax.
Getting Started
23