Xerox WorkCentre 5765 Aan de slag handleiding - Pagina 13

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox WorkCentre 5765. Xerox WorkCentre 5765 32 pagina's. Smart card
Ook voor Xerox WorkCentre 5765: Aanvullende handleiding (1 pagina's), Informatie handleiding (50 pagina's), Handleiding voor beoordelaars (24 pagina's), Gegevensblad (18 pagina's), Informatieblad (8 pagina's), Veilige installatie en bediening (11 pagina's), Gebruiksaanwijzing (5 pagina's), Gebruikershandleiding (8 pagina's), Een kopie maken (10 pagina's), Installatiehandleiding (43 pagina's)

Loading Paper

Open the required paper tray.

•

Paper Trays 1 and 2 are fully adjustable for all media sizes between A5 and A3 (5.5x8.5" and

11x17").

•

Paper Trays 3 and 4 are dedicated paper trays which are set to hold either A4 or 8.5 x11" LEF

paper.

•

Paper Tray 5 is an optional high capacity paper source. The standard tray has a single tray

which is set to A4 or 8.5x11" LEF. Two optional kits are available to allow Tray 5 to feed A3 or

11x17" SEF and A4 or 8.5x11" SEF.

•

Bypass Tray accommodates most types of media in a range of sizes between A6 and A3 SEF

(4.25x5.5" and 11x17" SEF).

Note:

LEF = Long Edge Feed and SEF = Short Edge Feed.

Load paper. Paper must not be loaded above the maximum fill line.

If loading trays 1 or 2, make sure that the paper guides

are in the correct position for the paper size. Adjust

each guide by squeezing the clamp mechanism and

sliding the guide to just touch the edge of the media.

If loading the Bypass Tray, locate the media against

the front of the tray and move the rear guide to touch

the rear of the stack.

If loading Tray 5, press the button to open the door.

Wait for the paper tray to lower. The media required is

displayed on the screen. Place the media in the tray. Media must be positioned against the right

side of the tray.

Close the paper tray or tray door as required. The Bypass Tray remains open.

If the Paper Settings screen is displayed, select the size, type and color of the paper you have

loaded and select Confirm.

If the tray is a Dedicated tray the paper size and type specified on the touch screen must be

loaded and the Paper Settings screen is not displayed.

For information about loading special media, refer to

Specification information for the WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 is provided

at www.xerox.com.

Media Types

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

on page 233 of

Paper and

Getting Started

Loading Paper

Media.