Xerox WORKCENTRE 7120 Handleiding systeembeheerder - Pagina 10

Blader online of download pdf Handleiding systeembeheerder voor {categorie_naam} Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 20 pagina's. Color networking mfp a3
Ook voor Xerox WORKCENTRE 7120: Handleiding voor beoordelaars (25 pagina's), Handleiding voor beoordelaars (24 pagina's), Referentiehandleiding (30 pagina's), Specificaties (14 pagina's), Specificaties (14 pagina's), Vergelijking met concurrenten (11 pagina's), Vergelijking met concurrenten (11 pagina's), Brochure & specificaties (4 pagina's), Referentiehandleiding (29 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (20 pagina's), Gebruiksaanwijzing (20 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Gebruiksaanwijzing (20 pagina's), Referentiehandleiding (32 pagina's)

Pagina afdrukken
Xerox WORKCENTRE 7120 Handleiding systeembeheerder
Introduction
Overview
This guide is designed for a system administrator with network administrator rights who has
knowledge of networking concepts as well as experience creating and managing network user
accounts.
This guide will help you install, configure, and manage the printer on a network.
Notes:
•
Network features are not available if you are connected over USB.
•
Embedded fax features are not available for all printer models.
Configuration Steps
When configuring the printer for the first time, Xerox suggests that you follow these steps in this order:
1.
Connect an Ethernet cable from your printer to the network.
2.
Confirm that your printer is recognized on your network. By default, the printer is configured to
receive an IP address from a DHCP server over a TCP/IP network. If you have another type of
network, or want to assign a static IP address, see
3.
Provide basic information such as your location, time zone, and date and time preferences, by
completing the Installation Wizard. For details, see
4.
Print a Configuration Report listing the printer's current configuration. Review the report and
locate the printer's IP address. For details, see
5.
Open a Web browser and type the IP address of your printer to access CentreWare Internet
Services (CentreWare IS). CentreWare IS is administration and configuration software installed on
the printer's embedded Web server. For more information see
page 16.
Note:
Most configuration settings are located on the Properties tab in CentreWare IS. If your
printer is locked, you must log in as the system administrator. For details, see
CentreWare IS
on page 16.
6.
Print the configuration checklist. The Configuration Checklist lists provides space for you to write
down important information as you go through the configuration process. Use it to record
information about your network settings, including passwords, network paths, and server
addresses. For details, see
7.
Configure Authentication. For details, see
8.
Configure Security. For details, see
9.
Enable services in CentreWare IS. For details, see
10. Configure Print, Scan, and Fax features. For details, see
and
Faxing
on page 103.
11. Configure Accounting. For details, see
10
WorkCentre 7120 Multifunction Printer
System Administrator Guide
Configuration Report
Accessing the Configuration Report
Setting up Access Rights
Security
on page 43.
Accounting
Enabling TCP/IP
on page 20.
The Installation Wizard
on page 15.
Accessing CentreWare IS
on page 17.
on page 44.
Enabling Services and Options
Printing
on page 67,
on page 115.
on page 15.
on
Accessing
on page 18.
Scanning
on page 83,