Xerox WORKCENTRE C2424 Servicehandleiding - Pagina 9

Blader online of download pdf Servicehandleiding voor {categorie_naam} Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 11 pagina's. Copier-printer
Ook voor Xerox WORKCENTRE C2424: Snelle referentiehandleiding (14 pagina's), Brochure (8 pagina's), Aanvullende handleiding (7 pagina's), Specificaties (6 pagina's), Gebruikershandleiding (43 pagina's), Aan de slag handleiding (26 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (20 pagina's), Onderhoudshandleiding (20 pagina's), Gebruikershandleiding (19 pagina's), Gebruiksaanwijzing (16 pagina's), Handmatig (12 pagina's), Gebruiksaanwijzing (6 pagina's), Installatiehandleiding (4 pagina's), Installatiehandleiding (2 pagina's), Vervanging invoerrollerset (2 pagina's), Installatiehandleiding (2 pagina's), Vrijwillig sjabloon voor producttoegankelijkheid (10 pagina's), Vergelijking met concurrenten (3 pagina's), Snelle referentiehandleiding (14 pagina's), Snelle referentiehandleiding (13 pagina's)

Using the Parts List

No.: The callout number from the exploded part diagram.

Part Number: The material part number used to order specific parts.

Qty: This number represents the parts per printer, not the number of parts

supplied in the actual part order.

Name/Description: Details the name of the part to be ordered and the number of

parts supplied per order.

Parts identified throughout this manual are referenced PL#.#. For example,

PL3.10 means the part is item 10 of Parts List 3.0

A black triangle preceding a number followed by a parenthetical statement in an

illustrated parts list means the item is a parent assembly, made up of the

individual parts called out in parentheses.

The notation "with X~Y" following a part name indicates an assembly that is

made up of components X through Y. For example, "1 (with 2~4)" means part 1

consists of part 2, part 3, and part 4.

An asterisk (*) following a part name indicates the page contains a note ab

this part.

The notation (NS) next to a part indicates that particular part is not spared,

contained in a kit or major assembly.

10.

The notation "J1<>J2 and P2" is attached to a wire harness. It indicates tha

connector Jack 1 is attached to one end of the wire harness and connector J

attached to the other end that is plugged into P2.

Note

Only parts showing part numbers are available for support. Parts not show

part numbers are available on the parent assembly.

Legend:

Identifier

Parts Lists

fineline6

Meaning

C-ring

E-ring

KL-clip

Screw

9-3