Xerox 4150 - WorkCentre B/W Laser Aan de slag handleiding - Pagina 25

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox 4150 - WorkCentre B/W Laser. Xerox 4150 - WorkCentre B/W Laser 38 pagina's. Mfp
Ook voor Xerox 4150 - WorkCentre B/W Laser: Brochure & specificaties (4 pagina's), Handleiding voor beoordelaars (24 pagina's), Snelle referentie (1 pagina's), Cartridges vervangen (1 pagina's), Handleiding voor installatie-instructies (40 pagina's), Module Installatiehandleiding (1 pagina's), Hardware installatiehandleiding (1 pagina's), Installatiehandleiding voor traymodule (1 pagina's), Module Installatiehandleiding (1 pagina's), Installatiehandleiding (6 pagina's), Vergelijking met concurrenten (4 pagina's), Veilige installatie en bediening (4 pagina's), Servicehandleiding (13 pagina's)

Sending a Fax

Load the documents to be faxed either face down on the Document Glass or face up into

the Document Feeder.

Press the Services button on

the Control Panel. Select the

All Services button and

choose the Fax option. This

displays the Basic Fax

screen.

Enter the recipient's fax

number by:

• Keypad Dial - enter the

number on the numeric keypad.

• Manual Dial - if a telephone handset is attached to the WorkCentre, select Manual Dial

and dial the number on the handset.

• Speed Dial - Select Speed Dial and enter a pre-set speed dial number.

• Send List - Add several recipients to the Send List to send the same fax to several

recipients. This button provides access to the dial directory for individuals and groups.

Select the required features for your fax job. They are shown in the following table:

Basic Faxing

Sides Scanned - 1-sided or 2-sided

originals

Resolution - sets the quality of image

NOTE:

The Added Fax Features tab provides access to fax setup features such as

creating mailboxes, adding names to a dial directory and other useful options.

Press Start to transmit your fax.

NOTE:

To confirm the Fax job, press the Job Status button on the Control Panel to display

the Job Status screen. The queued job will be displayed.

getting started guide

Image Adjustment

Image Quality - adjust settings to

improve image quality

Color Mode - mono or color

Original Size - set size of original