Direct power BM210J Veiligheids- en bedieningshandleiding - Pagina 4

Blader online of download pdf Veiligheids- en bedieningshandleiding voor {categorie_naam} Direct power BM210J. Direct power BM210J 17 pagina's. 8 1/2" compound mitre saw

Pagina afdrukken

SAFETY INSTRUCTIONS

WARNING! Read all instructions.Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
SAVETHESE INSTRUCTIONS
1. Keep the work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power tools in damp or wet
locations. Keep the work area well lit. Do not use power tools where there is risk
to cause fire or explosion.
3. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces (e.g. Pipes, radiators,
ranges, refrigerators, other metal surfaces).
4. Keep children away.
Do not let visitors touch the tool or extension cord. All visitors should be away
from area.
5. Store idle tools.
When not in use, tools should be stored in a dry, high or locked up place, out of
reach of children.
6. Do not force the tool.
It will do the job better and safer at the rate for which it was intended.
7. Use the right tool.
Do not force small tools or attachments to do the job of a heavy-duty tool. Do not
use tools for purposes not intended, for example, do not use circular saws to cut
tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, they can be caught in moving parts.
Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
9. Use safety glasses.
Also use face or dust mask if the cutting operation in dusty.
10. Connect dust extraction equipment.
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
11. Do not abuse the cord.
Never carry the tool by the cord or yank it to disconnect it from the socket. Keep the
cord away from heat, oil and sharp edges.
12. Secure work.
Use clamp or a vice to hold the work. It is safer than using your hand and frees
both hands to operate the tool.
13. Do not overreach.
Keep proper footing and balance at all times.
14. Maintain tool with care.
Keep cutting tools sharp and clean for better and safer performance. Follow