Xerox DocuColor 260 Release Release - Pagina 17

Blader online of download pdf Release Release voor {categorie_naam} Xerox DocuColor 260. Xerox DocuColor 260 41 pagina's. Docucolor advanced multifunction
Ook voor Xerox DocuColor 260: Functiehandboek (12 pagina's), Gebruikershandleiding (32 pagina's), Specificaties (8 pagina's), Handleiding voor beoordelaars (14 pagina's), Handleiding voor beoordelaars (16 pagina's)

Page 17

Page Range

You cannot access the Page Range option from the printer driver. Use the application page

range option or change the setting for this option in Command WorkStation.

Layout (N-up Layout) and Print Page Borders

If you print an N-up job, where N is greater than 1, from the PCL printer driver, you can

control whether the borders of the pages are printed, using the Print Page Borders option.

If you print from the PostScript printer driver, page borders are always printed.

Offset Mode and Page Size

If you enable Offset Mode (Finishing tab) for your print job, do not select A5 LEF and B5

SEF as Page Size

Finishing Options

Stapler Mode and Punch Position

Stapling and punching require that a finisher is installed on the copier. The finisher type

determines the number of holes (2, 3, or 4) punched. Use the Punch Position print option to

specify the position of punching. Use the Stapler Mode print option to specify the number

(1 or 2) and position of staples.

Finishing Options on the Advanced or Professional Finisher

Neither stapling nor punching are supported for the following page sizes on the Advanced or

Professional Finisher:

4 x 6 SEF, 5 x 7 SEF, A5 SEF, A5 LEF, B5 SEF, 12 x 18 SEF, SRA3 SEF, 13 x 19 SEF

For which stapling and punching options are available for each supported page size, see the

following tables.