Xerox WORKCENTRE 5775 Aan de slag handleiding - Pagina 24

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox WORKCENTRE 5775. Xerox WORKCENTRE 5775 32 pagina's. Smart card
Ook voor Xerox WORKCENTRE 5775: Informatie handleiding (50 pagina's), Handleiding voor beoordelaars (24 pagina's), Gegevensblad (18 pagina's), Informatieblad (8 pagina's), Veilige installatie en bediening (11 pagina's), Gebruiksaanwijzing (5 pagina's), Gebruikershandleiding (8 pagina's), Een kopie maken (10 pagina's), Installatiehandleiding (43 pagina's)

Saving Jobs for Reprinting

Load your documents face up in the document feeder input tray. Adjust the guide to just touch the

documents.

Or...........

Lift up the document feeder. Place the document face down onto the document glass and register

it to the arrow at the top right rear corner. Close the document feeder.

Press the Clear All (AC) button once to cancel any previous screen programing selections.

Press the Services Home button and select the Copy

option.

The Copy features are displayed.

Program the required job features.

Select the Job Assembly tab, and then Save Job for Reprint.

Select the option required:

Copy & Save is used to store the job and print a

•

copy of the job.

•

Save Only stores the job without printing.

Select a folder location to store the job.

Select New Job Name and enter a name for the job

using the keyboard.

Select Save to save the job name and return to the previous screen.

Press Start to run the job.

10. The job is scanned and saved with the name entered, in the folder selected. If Copy & Save was

selected, a copy of the job is also printed.

Jobs can also be saved using the print driver options or Internet Services. For additional information

about Saving Jobs for Reprint, refer to

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Getting Started

Saving a Job

on page 189 of

Save and Reprint

Jobs.