Xerox WORKCENTRE 5790 Aan de slag handleiding - Pagina 11

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox WORKCENTRE 5790. Xerox WORKCENTRE 5790 32 pagina's. Smart card
Ook voor Xerox WORKCENTRE 5790: Informatie handleiding (50 pagina's), Referentiehandleiding (7 pagina's), Handleiding voor beoordelaars (24 pagina's), Gegevensblad (18 pagina's), Informatieblad (8 pagina's), Veilige installatie en bediening (11 pagina's), Gebruikershandleiding (8 pagina's), Een kopie maken (10 pagina's), Installatiehandleiding (43 pagina's)

Power On and Off

Ensure that your device is connected to a suitable

power supply and that the power cord is fully plugged

in to the electrical outlet of the device.

Press the Power switch. The entire powering on process

(to power on all installed options) takes less than 3

minutes.

Press the Power switch. The Power Down options are displayed:

•

If Energy Saver is selected, the device will

immediately enter the Power Saver Mode

appropriate to its configuration.

•

If Quick Restart is selected and confirmed the

device will restart. Any copy jobs in the job list will

be deleted, print jobs in the job list are recovered.

•

If Power Down is selected and confirmed the

device is powered down.

•

If Cancel is selected the power down options will be cancelled and the device will be available

for use.

Select Power Down. A confirmation screen displays a warning that data may be lost if the device

is powered down.

Note:

Confirming power down will result in the deletion of any jobs currently in the queue.

Select the Confirm button to power off the device.

The device will begin a controlled power down sequence. It remains on for approximately 45

seconds before switching off.

WorkCentre™ 5735/5740/5745/5755/5765/5775/5790

Power On and Off

Getting Started