Xerox WorkCentre M128 Handleiding voor snelle netwerkinstallatie - Pagina 5

Blader online of download pdf Handleiding voor snelle netwerkinstallatie voor {categorie_naam} Xerox WorkCentre M128. Xerox WorkCentre M128 7 pagina's. Drum cartridge remanufacturing
Ook voor Xerox WorkCentre M128: Handleiding voor beoordelaars (12 pagina's), Brochure & specificaties (6 pagina's), Installatiehandleiding (2 pagina's), Netwerkhandleiding (50 pagina's), Handleiding scannen (28 pagina's), Kaart voor snelle installatie (2 pagina's), Referentiehandleiding (20 pagina's), Servicehandleiding (22 pagina's), Instructies voor herfabricage (14 pagina's)

Pagina afdrukken
Xerox WorkCentre M128 Handleiding voor snelle netwerkinstallatie
Figure 1
N
:
OTE
CentreWare Internet Services is a powerful tool for configuring the M123/M128 device
remotely. The default user name is "x-admin" and password is "11111". These should be changed
.
after install
Step 4
: Load the Print Drivers on the workstations that will be accessing the M123/M128 device.
For more detailed instructions, see the System Administrator Guide.
Q
u
i
c
k
N
e
t
w
o
r
k
S
e
t
u
p
(
S
t
a
t
i
c
I
P
)
Q
u
i
c
k
N
e
t
w
o
r
k
S
e
t
u
p
(
S
t
a
t
i
c
I
P
)
For: WorkCentre M123/M128 WorkCentre Pro 123/128
Pre-requisite for manual setup of network using Static IP Address:
Note that on startup the M123/M128 Multifunction device defaults to DHCP to obtain its network
configurations, so DHCP must be turned off by manually entering a Static IP
Before installing, record the following information for use during setup:
TCP/IP Address:
Gateway Address:
Subnet Mask:
DNS Server Address:
To obtain this information contact your System Administrator.
QNS
Page 5 of 7
701P42078