Xerox WorkCentre Pro 238 Aanvullende handleiding - Pagina 15

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Xerox WorkCentre Pro 238. Xerox WorkCentre Pro 238 20 pagina's. Xerox multifunction printers detailed specifications
Ook voor Xerox WorkCentre Pro 238: Referentiehandleiding (27 pagina's), Specificatie (21 pagina's), Handleiding voor beoordelaars (27 pagina's)

Xerox WorkCentre Pro 238 Aanvullende handleiding
5
Select On and Save.
6
The Build Job Controls
button will appear on the
Basic Copying screen.
7
Place the first segment of
the body of the original in the
Document Handler.
8
Select the tray that contains
the body stock.
9
Select your required 1 or 2-sided option and any other settings for this
segment.
10
Press Start. The first segment will be scanned to memory.
11
Place the first tab divider face down on the document glass aligned to the rear
right hand corner and close the Document Handler.
12
Select the tray that contains the tab stock.
13
Select 1 - 1 sided copies.
14
Press Start. The divider will be scanned.
15
Repeat this process until all the segments of the document have been
scanned. Don't forget to make the appropriate selections for each segment. If
you make a mistake, select the Build Job Controls button and select Delete the
Last Segment. Scan the segment again.
16
When all the segments have been scanned, select Build Job Controls.
17
Select End Build Job. The
job will be compiled and one
sample set will be printed.
18
If the sample set is OK select
the Job Status button on the
control panel, locate the job
in the job queue and select
Release.
19
When printing is complete select the Clear All button to reset the machine to
the default settings.
Note:
Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement
In the unlikely event of a paper jam occurring, follow the instructions on the
screen and remove any partially used sets of tab stock from the paper
tray.
4 Copying using Build Job
13