Xerox DOCUCOLOR 12 Handmatig gebruiken - Pagina 8

Blader online of download pdf Handmatig gebruiken voor {categorie_naam} Xerox DOCUCOLOR 12. Xerox DOCUCOLOR 12 12 pagina's. Carrier
Ook voor Xerox DOCUCOLOR 12: Specificaties (2 pagina's), Referentiehandleiding (10 pagina's), Snelstarthandleiding (5 pagina's), Snelstarthandleiding (8 pagina's), Aanvullende handleiding (4 pagina's), Supplement handleiding (18 pagina's), Handleiding Kennismaken (24 pagina's)

O OPEN THE

Back panel screw

Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit

X12/F

X40

IERY

1. Make sure you have powered off the Fiery X12/Fiery X40 and removed all the cables from

the back.

2. Remove the screw from the back panel and set it aside (see below).

3. Grasp the side panel at the top on both sides and gently pull it away from the tray.

4. Lift off the side panel.

5. The Fiery X12/Fiery X40 internal components are now accessible. Attach an ESD wrist

strap before handling internal parts.

It is easier to service components inside the tray if the Fiery X12/Fiery X40 is

OTE

positioned so that it is resting on its side and the components inside the tray are facing

up.

Front panel

Side panel