Direct power BP245 Veiligheids- en bedieningshandleiding - Pagina 8

Blader online of download pdf Veiligheids- en bedieningshandleiding voor {categorie_naam} Direct power BP245. Direct power BP245 13 pagina's. 120w car buffer/polisher

Pagina afdrukken

Fig 2

Fig 3

Fig 4

Fig 5

OPERATION INSTRUCTIONS

1.PLACE TERRY-CLOTH POLISHING BONNET

(see Fig2)

Place terry-cloth-polishing bonnet securely over

sponge pad.

2.SPREAD THE POLISH (see Fig3)

Spread about a tablespoonful of polish as evenly

as possible over the surface of the pad cover.

Do not apply polish directly to car. This ﬁrst

application should do about 1/3 of an average

size car. For the second and third applications of

polish, repeat as above. The pad cover will not

adsorb as much when reloading.

3.SWITCH (see Fig4)

Always start and stop the polisher on against the

car surface. Push the switch to on position to start

the polisher, off position to stop the polisher.

4.TO USE THE CAR POLISHER (see Fig5)

Hold extension lead over shoulder and do ﬂat

surfaces ﬁrst ie: bonnet boot and roof. Cover

areas quickly with broad sweeping strokes in a

crisscross pattern. Do not press down on polisher.

The machine's action, not pressure, does the best

job.

5.WORK NEXT ON SMALLER SURFACES

(DOORS ETC.) (See Fig6)

Always keep the mains lead over the shoulder

or let it hang to the ground when working on a

vertical surface marking sure it is well clear of

the moving polishing head. For less accessible

surfaces (such as wing mirrors, door handles)

remove the polishing bonnet and polish these

areas by hand.

6.FINAL WORK (See Fig7)

Finally remove the terry-cloth application bonnet

and ﬁt the synthetic wool bonnet onto the polisher,

(see Fig2). Use long, sweeping strokes in a criss-

cross pattern to bring out the shine. Do not press

hard. Let the polisher do the work polishing.