Xerox Phaser 750DP Servicehandleiding - Pagina 32

Blader online of download pdf Servicehandleiding voor {categorie_naam} Xerox Phaser 750DP. Xerox Phaser 750DP 40 pagina's. Digital color printer / copier
Ook voor Xerox Phaser 750DP: Specificaties (2 pagina's), Brochure & specificaties (4 pagina's), Referentiehandleiding (8 pagina's), Handmatig (9 pagina's)

Pagina afdrukken
Xerox Phaser 750DP Servicehandleiding
Status
Code
10-366, 367
The control logic sensed that the Heat Roll temperature exceeded 180˚.
Initial action:
Check the Heat Roll Control Thermistor for cleanliness, damage and excessive wear at the point where the
Thermistor contacts the Heat Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-368
The control logic sensed an open circuit from the Pressure Roll control thermistor.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-369
The control logic sensed an open circuit from the Pressure Roll overheat thermistor.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-32
5750 DocuCare Service Manual