Xerox Xerox DocuMate 4790 Instellen - Pagina 4

Blader online of download pdf Instellen voor {categorie_naam} Xerox Xerox DocuMate 4790. Xerox Xerox DocuMate 4790 6 pagina's. Documate series for use with xerox freeflow makeready application
Ook voor Xerox Xerox DocuMate 4790: Handmatig (24 pagina's), Functies Handleiding (26 pagina's)

Pagina afdrukken

Setting up Xerox

iii) From the following window, select 'Application Settings' tab.

iv) From the drop down box, select your installed ADF scanner.

Click 'OK'

v) A pop-up will appear asking to power cycle the scanner. After

doing so and the scanner is ready, click 'OK'. Close all remaining open

windows.

vi) Open FreeFlow MakeReady, go to 'File>Select Scanner Data Source'.

A window will open showing the available scanner sources.

(See Section 2. vi)

Select the flatbed scanner you have installed

(DM4700).

vii) Initiate a scan. The driver UI will appear.

Note:

The combined driver's settings are applied to either

scanner when called by FreeFlow MakeReady. The

subtleties of this are covered in the next section.

Page 4

DocuMate

Scanners and Xerox

FreeFlow MakeReady

4. Driver Settings Overview

This section shows where in the driver UI the key features can be

enabled/disabled, and how to set default presets in the driver.

i) To enable access to the advanced features, first select

'Advanced' from the drop-down menu. 'Basic' is the default.

ii) When using the 'Combo' mode, it is advisable to enable both 'Auto

source' and 'ADF'. This means that when you click 'Scan' in the UI, if

there are no documents in the ADF, the flatbed will automatically

scan, and vice-versa.

iii) To change the scan mode from Black & White to Color, use the

dropdown as shown below. To enable your selection, place a check

mark in the relevant box.

(Advanced view shown below)

iv) The next few images show where in the driver UI key features can

be found and a brief summary. For more detailed information, please

refer to the manual on the scanner's DVD, or click the 'Help' button.

Also, there are tooltips which display when hovering your mouse

pointer over the item in question. It should also be noted that not all

features are available in all scan modes (Color/B&W/etc.)