Xerox 6100BD - Phaser Color Laser Printer Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 28 pagina's. Disk overwrite installation and usage
Ook voor Xerox 6100BD - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (11 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

Xerox DocuSP IPDS User Guide

3 Using DocuSP IPDS

This chapter describes how to access the DocuSP IPS Manager to

set and manage the IPDS parameters.

For more details and specific procedures, refer to the DocuSP IPS

Manager on-line help.

Logging on as a specific user type allows you to access particular

features that the walk up User cannot access. Before you log on,

know your user access level and the password.

Log on to DocuSP in order to access the IPS Manager at the

necessary logon level.

NOTE: You must be logged on as Operator or System Administrator

to access the system menu options.

The IPS Manager screen is the main system screen for IPDS support.

It is the entry point to all other screens used in IPDS data stream

management.

The IPS Manager dialog options allow you to enter the settings used

by DocuSP IPDS to compose the pages specified by the IPDS data

stream. DocuSP retains all parameter values on the printer controller

during shutdown and restores the settings the next time you start the

IPDS system.

The values that you specify remain in effect until you change them. If

you change these values to process a specific IPDS data stream,

make sure you restore the values to the original settings once your job

completes. Otherwise, all subsequent IPDS data streams may be

processed incorrectly.

NOTE: In order to change the options, you must be logged on as

either an Operator or System Administrator to save the changes.

After changing the settings on any tab, click Apply before changing

tabs in order to save your settings.

3-1