Xerox 6180DN - Phaser Color Laser Printer Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 34 pagina's. 26-ppm monochrome/ 20-ppm color
Ook voor Xerox 6180DN - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Specificaties (4 pagina's), Handmatig (28 pagina's)

Imposition/Layout enhancements

DocuSP 4.2 provides the user with a new template, the

Z-sort template. In addition, the Z-sort, or ZIP-sort

capability has been extended to all multiple-up options.

This addition allows multiple-up (e.g. 4-up, 6-up, 9-up,

etc.) to be cut and then stacked in a predefined order

so that postal sort order is maintained. See the figure

below.

Detail shot of new Cut and Stack control in the Layout FAB

The output may be either single-sided or double-sided,

and the layout numbers, as is suggested by the layout

example shown above, the pages and images

appropriately so that the order is maintained when cut

and stacked.

As a specific example of N-up imposition, consider the

2-Up case. 2-Up Flip right can be programmed by

selecting "Repeated" and by checking the "Flip Right"

box. In a similar fashion, the legacy 2-Up Cut and

Stack option can be programmed by selecting "Cut and

Stack" and checking the "Cut On Binding Edge" box.

DocuSP 3.8 and 4.0 to 4.1 Differences Document