Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 28 pagina's. Color laser printer
Ook voor Xerox 6180N - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Handleiding voor beoordelaars (16 pagina's), Specificaties (4 pagina's)

Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding
Installation and setup

Setting up media

2-4
Slip sheets
Stock attributes (Name, Size, Color, Type, Weight)
Modulus
Output Location
Layout (use 1 Up only)
Rotation
In DocuSP, you must define the stock using the Printer Manager,
assign each stock definition to a specific physical printer tray, and
load the stock in the trays.
The stock definitions are communicated to the DocuSP IPS Manager
for mapping to the IPDS trays through the Tray/Bin Mappings tab. The
IBM host believes that it is dealing with a printer that may have up to
eight input trays. These input trays may be considered virtual trays for
DocuSP IPDS. In the Tray/Bin Mappings tab you use stock names to
map the stock used for each actual physical tray to the stock name
used for each virtual tray used by the host.
Note that stock names are used to simplify selection in the Tray/Bin
Mappings dialog but that the DocuSP selects stock at print time based
on the stock properties.
Refer to the DocuSP on-line help for more information on using the
Tray/Bin Mappings tab.
Xerox DocuSP IPDS User Guide