Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 28 pagina's. Color laser printer
Ook voor Xerox 6180N - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Handleiding voor beoordelaars (16 pagina's), Specificaties (4 pagina's)

Xerox DocuSP IPDS User Guide

2 Installation and setup

The requirements and instructions for installing the DocuSP IPDS

software and setting up the printing environment are described in this

chapter. Review this entire chapter before proceeding with the

installation.

Some setup tasks are performed on the DocuSP window and some

are performed on the DocuSP IPDS window. The main installation

and setup tasks are:

•

Licensing and configuring the software and features

•

Defining the DocuSP IPDS queue

•

Setting up media

•

Loading IBM AFP resident outline fonts

•

Defining a logical printer

•

Verifying the installation

The following hardware and software is required to install DocuSP

IPDS.

The DocuSP IPDS software will run on a SunBlade 1000 or higher

based Digital Front End (DFE) printer controller that supports

DocuSP.

DocuSP, version 4.2 or higher.

If your DocuSP IPDS configuration requires a channel connection,

you will need an online channel board. Contact your local Xerox

representative for more information.

2-1