Xerox DocuPrint 155 Bedieningshandleiding - Pagina 30

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Xerox DocuPrint 155. Xerox DocuPrint 155 34 pagina's. Tape client job submission guide enterprise printing system
Ook voor Xerox DocuPrint 155: Bedieningshandleiding (38 pagina's), Specificaties (2 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Aanvullende handleiding (48 pagina's)

Changing print modes

Changing from NPS/IPS print mode to EPS print mode

3- 4

Use the following procedure to change operating modes of the

printing system from NPS/IPS mode to EPS mode.

NOTE: You must be logged in the system as either an Operator or

Administrator to switch between NPS/IPS and EPS modes.

1. Stop printing of any pending jobs, using one of the following

procedures:

•

In command line mode: On the command line, enter: stop

printing.

•

In GUI mode: Click the red [Stop Printing] button in the

upper-right corner of the main window.

2. View the document list and wait for any document currently

pending or being printed to complete. To view the list, do one

of the following:

•

In command line mode: Enter: list documents.

•

In GUI mode: Click the [Job Manager] icon to display the

Job Manager window.

3. From the Workspace background menu, select [Start EPS

Printing].

4. On the confirmation window that appears, click [Confirm].

Within a few minutes, the printing system reboots and starts in

EPS print mode, displaying the graphical user interface.

Refer to the DocuPrint 100/115/135/155/180 EPS customer

documentation set for information and procedures for operating in

EPS print mode.

NPS/IPS Extension Operations Guide