Xerox DocuPrint 180 Aanvullende handleiding - Pagina 28

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Xerox DocuPrint 180. Xerox DocuPrint 180 48 pagina's. User job submission quick reference card
Ook voor Xerox DocuPrint 180: Bedieningshandleiding (38 pagina's), Specificaties (2 pagina's), Codelijst (16 pagina's), Snelle referentiekaart (2 pagina's), Snelle referentiekaart (2 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Snelle referentiekaart (2 pagina's), Handleiding voor planning (38 pagina's), Referentiehandleiding (2 pagina's)

Managing and printing jobs from the Tape Client

Saving a tape

client setup

Preparing to print a tape job

2-4

You can save a tape client setup including the following areas of

the Tape Client window:

•

Input Device

•

Output Control

•

End of Job

•

Document

To save a tape client setup:

•

Click Save Setup in the Job Setup area to save the setup

under its current name, or

•

Click Save As... in the Job Setup area to save the setup

under a new name.

To delete a tape client setup, click Delete.

This section describes tasks that you perform to access the Tape

Client and set up a tape job for printing.

NOTE: The parameters that you specify on the Tape Client

window override the settings of the queue to which the job is

sent.

In order to print a job from tape, the resources (forms, fonts,

JDLs, JDEs, etc.) that are required by the job must be loaded in

the "lcds" resources folder on the DP 2000 Series EPS system

disk. If any of the resources that are needed for your job are

missing from this folder, you must import them from the media on

which they reside (diskette, tape, or another folder in the UNIX

file system on the DP EPS controller). To import resource files to

the "lcds" folder:

1. Click Administration on the DocuSP Print Services window.

2. Click the Lcds Resources tab to display the list of resources

that are currently in the "lcds" folder.

Tape Client Job Submission Guide