Xerox DocuSP 3.6 Handmatig - Pagina 22

Blader online of download pdf Handmatig voor {categorie_naam} Xerox DocuSP 3.6. Xerox DocuSP 3.6 34 pagina's. Docusp 3.6 to 3.7 differences
Ook voor Xerox DocuSP 3.6: Aan de slag (28 pagina's)

Pagina afdrukken

PCL Features and Additions

¨ The PCL tab in the Properties for a Queue has been

enhanced as follows.

¨ Operators may now save PCL resources on a job-by-job

basis, allowing for more routine saves. Previously, the save

resource function only occurred when the DocuSP controller

was shutdown.

¨ Operators may define the custom stock size for PCL custom

jobs in the job properties. This option introduces the ability to

define any size image for decomposition.

¨ A new check box allows the operator the ability to

automatically center custom sized stock in a manner similar

to the HP product line. When this feature is disabled, the

image is oriented to the side of the paper. This feature

provides HP 8100 bypass tray compatibility.

¨ The default line termination settings for PCL jobs can now be

set on the DocuSP UI. Previously, the line termination

settings had to be changed using a UNIX script.

¨ Line termination settings should not be used in a mixed PCL

and ASCII environment, because PCL data streams can

include other line termination escape sequences which could

change the line termination sequence without the operator's

knowledge.

¨ DocuSP 3.7x now supports HP PJL. Key features are

enabled for PJL data streams and include:

PJL Set Paper = Executive, Letter, A4, Legal, A3,

Ledger, Monarch, DL, C5, COM10, A5, Eurolegal, 14x17,

B5, JISB4, JISB5, Hagaki, Ohagaki, ISOB4, and Custom

PJL Set Duplex = Off, On

PJL Enter Language = PCL and PCL XL

PJL Set Binding = Longedge, Shortedge

¨ The operator may set the system to ignore PJL commands.

This emulates the behavior of prior releases.

DocuSP 3.6 to 3.7 Differences Document