Xerox DocuTech 6135 Handleiding voor planning - Pagina 30
Blader online of download pdf Handleiding voor planning voor {categorie_naam} Xerox DocuTech 6135. Xerox DocuTech 6135 38 pagina's. Docusp version 3.6
Ook voor Xerox DocuTech 6135: Specificaties (2 pagina's), Aan de slag (28 pagina's), Handleiding voor planning (20 pagina's), Installatiehandleiding (2 pagina's), Handleiding voor planning (16 pagina's), Release Release (2 pagina's)
Pagina afdrukken
C.P. Bourg Document Finisher (BDFx)
Limitations
System Dependencies and Prerequisites
Configuration Guide
Printer Configurations
FEEDER
FEEDER
PRINT
ENGINE
The diagram above is only an example. The
Xerox iGen3 Digital Production Press can have
the following configurations:
•
Up to 6 Feeders
•
1 inserter
•
Up to 4 Stackers
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The BCFx is not an available option together with the iGen3.
•
The Cover Page of the booklet must be sent as the last page
in the set.
•
If installing a new Book Factory on an existing iGen3
installation, a Xerox iGen3 Finishing Interface kit (product
code UYR) must be ordered.
•
The BSR is mandatory when a BDFx is installed inline with
iGen3. (The BSR is equipped with an enhanced static
elimination transport (Tag 21) that greatly reduces static on
papers delivered from the iGen3).
•
Transition of an existing BSR to an iGen3 is not possible
unless Tag 21 is already installed.
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
OUTPUT
INSERTER
STACKER
MODULE
5-2
Finisher Configurations
STACKER
BSR
BDFx
BSR
BDFx
SQEDG