XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat
During a Print Now or Proof, a message to
"Remove Sheets from the Top Tray" may be
displayed when there is no need to remove
sheets. Always clear the message before
performing any other operation.
When a job is printing to the top tray and is
interrupted by a print now or proof job, the
interrupted job stops (as it should) and an
error message reads "remove sheets from top
tray". Whether the sheets are removed or not,
the message stays until "reset" is selected in
the fault frame.
The listp command does not work on the 61xx
system.
If the system is in power saver mode and all of
the paper trays are empty, when the power
saver mode is reset, the printer may hang with
the printer initializing until paper is added to
the trays.
External finishing cannot be selected at the
client using the IPP or HTTP gateways.
Submit the job to the printer without any
finishing, and select the external finisher at the
DocuSP.
Do not apply late binding attributes (Apply
Properties Now) and Reposition Output
options on the same job.
Intervening DJDE packets cause the EPS and
LPS to process GRAPHIC DJDEs differently.
LPS prints the data on the same page. EPS
prints the data on two or more pages.
For multi-copy jobs, if an OTEXT command is
specified on a copy pass for a page that
doesn't print (no data on the page), then the
OTEXT message will not be displayed and the
WAIT parameter will be ignored.
The system is unable to resume printing when
late binding attributes and page spacing
options are used. As a work around, restart
the DocuSP or Select Sample Current job
from the Printer drop down menu to activate
the resume and sample button on the
repositioning output dialog box and the
Resume button on the DocuSP main window.
DOCUSP 3.6.xx
Applicable printer product
DocuTech 61xx
DocuTech 61xx
DocuTech 61xx
DocuTech 61xx
DocuPrint 1xx EPS
DocuTech 61xx
DocuPrint 1xx EPS
DocuPrint 1xx EPS
DocuPrint 1xx EPS
DocuPrint 1xx EPS
2-3
Pagina afdrukken