Xerox FreeFlow Beveiligingshandleiding - Pagina 24

Blader online of download pdf Beveiligingshandleiding voor {categorie_naam} Xerox FreeFlow. Xerox FreeFlow 38 pagina's. For color 560/570 printer
Ook voor Xerox FreeFlow: Installatiehandleiding (34 pagina's), Brochure (2 pagina's), Release Release (23 pagina's), Installatiehandleiding (2 pagina's), Release Release (33 pagina's), Belangrijke installatie-informatie (2 pagina's), Gebruikershandleiding (50 pagina's), Handmatig (18 pagina's), Quick Connect handleiding (2 pagina's), Handboek met procedures voor vervoerders (28 pagina's)

Strong Passwords

NOTE: Please be aware that Xerox Customer Support Personnel

must have access to the new root password for service and

support. It is the customer's responsibility to ensure that the root

and system administrator passwords are available for them.

The Xerox FreeFlow Print Server provides additional security for

users required to adhere to strict security guidelines. It provides a

means in which a strong password policy can be enforced.

Strong Passwords can be Enabled and Disabled (default setting)

via the Password Policies window.

Strong passwords must consist of ALL of the following

•

A minimum of 8 characters in length

•

Contain at least one capital letter

•

Contain at least one number

•

Contain at least one special character {!, @, #, $, %, ^, &, *},

including open and close parentheses { ( ) }, hyphen{ - },

underscore{ _ }, and period{ . }.

NOTE: The strong password requirements cannot be modified. A

strong password cannot be set for root or any other Solaris user

accounts that are not created by the Xerox FreeFlow Print Server.

NOTE: Remote Network Server: If running NIS+ name service,

strong passwords would be enforced via the NIS + server.

This policy can be set by using the -a <# of allowed attempts>

argument with rpc.nispasswdd. For example, to limit users to no

more than four attempts (the default is 3), you would type:

rpc.nispasswd -a 4.

How to Enable/Disable Strong Password

•

From the Setup menu select [Users and Groups]

•

From the Policies drop down menu select [Password]

•

Enable/Disable Strong Password from the Password Policies

window. The default setting is "Disable".

The Xerox FreeFlow Print Server has provided a means to lockout

users after reaching the maximum number of consecutive

attempts. Once this is done, the user will need to apply (reset) a

security policy and reboot the system.

The number of failed attempts and enable/disable is configurable

via the Password Policy screen. When enabled, login attempts

can be set from 1-6 attempts before the user is locked out. This

Security Guide