Xerox Nuvera 100 Bedieningshandleiding - Pagina 24

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 34 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Aanvullende handleiding (48 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's), Aan de slag handleiding (30 pagina's)

Pagina afdrukken

Installation planning

DocuPrint IPS Extension

Installation process

2- 2

•

lpr information

•

UNIX command tool availability

Since you are upgrading your DocuPrint 100/115/135/155/180

EPS, many of these parameters have already been determined.

However, you should refer to "Preparing for installation" in the

Installation Planning Guide for specific information.

The following is an overview of the tasks associated with setting

up your system to accept IPDS data from an IBM host. Some

tasks that typically need to be performed prior to installation are:

•

Install Token Ring to the system location, if applicable.

•

Install Ethernet to the system location, if applicable.

•

Define the printer to your host as an AFP Type 1, Group 3

printer.

•

Specify a superuser password.

Defining the printer to a host

In order to send data from the IBM host to the printing system, you

must define the printer on your host. The IBM host to which you

are connecting the printing system, as well as the type of

connection used, determines how the printer is defined on the

host.

For example, you may connect the printing system to an AS/400

host through a Token Ring network, or to a PC with OS/2 software

via Ethernet.

For detailed information about defining the printer to your specific

host and connectivity requirements, refer to "Preparing for

installation" in the DocuPrint NPS/IPS Installation Planning Guide.

To efficiently install and set up the NPS/IPS Extension option on

your 100/115/135/155/180 EPS system, certain activities need to

be performed by you and by Xerox.

Xerox is responsible for the physical installation of the NPS/IPS

Extension hardware and IPS/NPS software. The steps in the

installation process typically occur in the following order:

1. Xerox personnel install the NPS/IPS software and the NPS/

IPS Extension hardware.

2. Xerox personnel obtain a software license authorizing you to

use the IPS/NPS software.

NPS/IPS Extension Operations Guide