Xerox Nuvera 100 Aan de slag handleiding - Pagina 6

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 30 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Bedieningshandleiding (34 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Aanvullende handleiding (48 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's)

Safety and Notices

Radio Frequency Emissions

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These

limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his/her own expense.

Changes or modifications to this equipment not specifically approved by the Xerox

Corporation may void the user's authority to operate this equipment.

WARNING

Shielded cables must be used with this equipment to maintain compliance with FCC

regulations.

This Class 'A' digital apparatus complies with Canadian ICES-003.

Cet appareil numèrique de la classe 'A' est conforme á la norme NMB-003 du Canada.

This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency

Identification device (RFID). This RFID device complies with the requirements specified in FCC

Part 15, Industry Canada RSS-210, European Council Directive 99/5/EC, and all applicable local

laws and regulations.

Operation of this device is subject to the following two conditions: 1) this device may not

cause harmful interference, and 2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications to this equipment not specifically approved by Xerox Corporation

may void the user's authority to operate this equipment.

Xerox Nuvera

Getting Started Guide