Xerox Synergix 8825 Software Handleiding - Pagina 15

Blader online of download pdf Software Handleiding voor {categorie_naam} Xerox Synergix 8825. Xerox Synergix 8825 30 pagina's. Windows nt 4.0 postscript print driver user guide
Ook voor Xerox Synergix 8825: Gebruikershandleiding (48 pagina's), Installatiehandleiding (20 pagina's), Release Release (23 pagina's), Aanvullende handleiding (26 pagina's)

Xerox Synergix 8825 Software Handleiding
Driver Configuration (Document Properties Dialog)

Document Properties Dialog Tabs

This dialog consists of three Tabs: the Page Setup Tab, the Advanced Tab
and the Job Tab. Select a Tab, change any parameters to the settings
desired, then click the OK button for your changes to take effect and to return
you to the application Print screen.

Advanced Tab Parameters

PAPER/OUTPUT PARAMETERS

Paper Size
This parameter displays the currently-selected paper size. To change the
paper size to match your application's page layout, left mouse click on
Paper Size and make a selection from the available list in the bottom
dialog box. The default paper size is Letter.
PostScript Custom Page Size - If you click on this selection from
the list of available paper size settings, you can create Custom Page
Size dimensions and modify the position of your printed page relative
to the edge of the roll or sheet of media. Note that with roll fed media
the paper feed direction is not applicable.
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide
Figure 4. Typical Document Properties Dialog
11